if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
#8 1-1/2 Self-Piercing Sheet Metal Screw 4,500 Pk
MALCO HW8X1-1/2Z-4500 51094 4500PK ZIP-IN SCREWS
Sheet Metal Screws
}
#8 1-1/2 Self-Piercing Sheet Metal Screw 4,500 Pk
733197
MFG #: HW8X1-1/2Z-4500
Product ID:733197
Famous Supply
- Head Size: 1/4 in
- Thread Length: 1-1/2 in
- Thread Type: Double
- Type: Self-Piercing
- Measurement System: Imperial
- Diameter - Thread Size: #8
- Head Type: Hex Washer
- Drive Type: Slotted
- Finish: Zinc Plated
A unique thread design and quality controlled manufacture spell the Zip-In® difference. Zip-In's® sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's® penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In® screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.
- Features
- Warranty
- Standards & Approvals
| Undercut - indented hex washer slotted head |
| Bright zinc plated |
| Burr free |
| Full 1/4 in (No 8) head will not strip out of hex driver opening |
| One 1/4 in hex driver accommodates all sizes |
| Undercut - always seats flush |
| Some screws sizes available in pails |
| Trademarked and patented head markings indicate one and only genuine zip-ins |
| Combination lead double thread design single starting thread machined down to very tip of screw point, Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge |
| Consistent hard point quality controlled heat treat |
| Sharp tapered point will not mushroom or break |
| No walking |
| Limited Lifetime |
| US Patent No. D524/638 |