if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Honeywell R7847A1033/U Solid State Plug-In Flame Amplifier
HONEYWELL R7847A-1033 AMPLIFIER RECTIFICATION 3 SEC FLAME 2 OR 3 SEC FLAME FAILURE RESPONSE TIME.
Burner Controls
}
Honeywell R7847A1033/U Solid State Plug-In Flame Amplifier
688767
MFG #: R7847A-1033
Product ID:688767
Famous Supply
- Dimensions: 3-9/16 in L x 7/8 in W x 3 in H
- Type: Solid State Plug-In
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 series relay modules.
- Features
- Warranty
- Standards & Approvals
| Flame failures response time of 0.8 or 3 sec |
| Flame signal strength ranges from 0 to 5 VDC |
| Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation |
| Flame signal test jacks to measure amplifiers flame signal voltage |
| Dynamic self check amplifiers test the detectors and all electronic components in the flame detection system 7800 series relay module locks out on safety shutdown with flame detection system failures |
| Compatible with existing Honeywell® flame detectors |
| For use with C7004, C7005, C7007, C7008, C7009, Q179 rectifying flame rods and ultraviolet flame sensor C7012A, gas, oil, coal flame sensor |
| For 7800 series and R7140 relay module |
| Limited |
| CSA File No LR95329-3 |
| Guide No MCCZ |
| UL File No MP268 |