if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
FlowGuard Gold 16 oz CPVC Cement, 1-Step All Weather Low VOC Medium Body, Yellow
OATEY 31912 16 OZ CPVC FLOWGUARD GOLD CEMENT
Plastic Cements
}
Brand: 
FlowGuard Gold 16 oz CPVC Cement, 1-Step All Weather Low VOC Medium Body, Yellow
681740
MFG #: 31912
Product ID:681740
Famous Supply
- Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
- Curing Time: 1 or 6 hr
- Odor/Scent: Solvent
- Series: 1-Step All Weather Low VOC Medium Body
- Setting Time: 4 to 5 min
- Temperature Rating: 0 to 110 deg f
- Container Size: 16 oz
- Type: CPVC
- Color: Yellow
- Suitable For Use With: 2 in Dia Copper Tube/CPVC Hot and Cold Potable Water Pipe and Fittings
Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Features
- Standards & Approvals
| For cold water systems and hot water systems up to 200 deg F |
| May be used without primer where local codes permit |
| Recommended application temperature 0 to 110 deg F |
| FlowGuard Gold® is a registered trademark of The Lubrizol Corporation |
| Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength |
| Minimum 500 cps at 73 deg F +/- 2 deg F viscosity |
| 7.98 +/- 0.2 lbs./gallon density |
| 1 hr Cold/6 hr hot water above 60 deg F curing |
| 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting |
| ASTM F493 |
| IAPMO Listed |
| NSF 61 for PW |
| DWV and Sewer Waste |