if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
1-1/2 in Air Scoop
TACO 433-5 1-1/2" AIR SCOOP
Hydronic Air Scoops
}
Brand: 
1-1/2 in Air Scoop
679603
MFG #: 433-5
Product ID:679603
Famous Supply
- Dimensions: 8 in W x 6 in H
- Flow Rate: 8 fps
- Type: Air Scoop
- Nominal Size: 1-1/2 in
- Connection Type: FNPT
- Working Pressure: 125 psi
- Temperature Rating: 300 deg f
- Material: Cast Iron
The special design and internal baffles of Taco Air Scoops® slow water velocity to separate the air from solution. Thanks to this design, Taco Air Scoops efficiently remove air to provide noiseless, air-free hydronic heating, cooling or combination systems. They also provide an economic way to integrate air elimination by the connection of either a plain steel or diaphragm expansion tank. Quality features include one-piece, cast iron construction, and engineered baffle to separate air from water, maximum operating pressure of 125 psi (862 kPa) and maximum operating temperature of 300 deg F (135 deg C).
- Features
- Application
| One piece cast iron construction |
| Engineered baffle to separate air from water |
| Never requires any servicing |
| Media are water, water/glycol mix |
| 61 Cv |
| Operation - Air being lighter than water, it travels along the upper portion of horizontal pipe in low velocity hydronic systems |
| As the air and water enter the air scoop there velocity decreases, permitting the air bubbles to be scooped up by the baffle and direct to the top of the chamber |
| The air reaching the top of the air scoop is either immediately vented through a Hy-Vent® or it moves into a conventional plain steel expansion tank (models 433, 434, 435, 436, and 437), if used |
| Should the air completely fill the plain steel tank and back down into the Air Scoop, the excess will be removed by the hy-vent without disturbing the operation of the system |
| Taco air scoops are available in 1 in through 3 in cast iron threaded |
| Each air scoop has an 1/8 in vent connection on top for the installation of a Taco 400-3 or 416-1 hy-vent, and a 1/2 in bottom tapping for a diaphragm expansion tank |
| The 1-1/2 in through 4 in air scoops also have an additional top tapping for the connection of a plain steel expansion tank |
| 4 in top to inlet |
| 1/2 x 1/8 in NPT |
| For Heating, Cooling, Combination System |