if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Grundfos 96411804 TP40-240/2B TP Series 1-Stage In-Line Direct-Coupled Circulator Pump, 63 gpm Flow Rate, 1-1/2 in Inlet x 1-1/2 in Outlet, 115/208 to 230 VAC, 1 ph, 5.21 ft Max Suction Lift
GRUNDFOS 96411804 TP40-260B BOILER PUMP 1X115/208/230V
Hydronic Circulating Pumps
}
Grundfos 96411804 TP40-240/2B TP Series 1-Stage In-Line Direct-Coupled Circulator Pump, 63 gpm Flow Rate, 1-1/2 in Inlet x 1-1/2 in Outlet, 115/208 to 230 VAC, 1 ph, 5.21 ft Max Suction Lift
3477382
MFG #: 96411804
Product ID:3477382
Famous Supply
- Amperage Rating: 17/9.5 to 8.6
- Dimensions: 342.9 mm L x 508.8 mm H
- Frequency Rating: 60
- Impeller Type: AISI 304 Stainless Steel
- Maximum Head: 78.74 ft
- Maximum Pressure: 145 psi
- Motor Speed: 3450 rpm
- Mounting Type: Flange
- Power Rating: 1-1/2 hp
- Series: TP Series
- Temperature Rating: 104 deg F Ambient
- Type: Single Speed , Cast Iron
- Flow Rate: 63 gpm
- Material: Bronze
- Voltage Rating: 115/208 to 230
- Phase: 1
Grundfos TP vertical in-line pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.
- Features
- Standards & Approvals
- Includes
| This pump model is notable for its high levels of reliability and efficiency |
| Quiet, highly-efficient motors are standard components |
| All TP pumps are electro-coated to ensure high corrosion resistance |
| Optimized hydraulics for high efficiency |
| Reduced power consumption |
| Top-pull-out design |
| Easy dismantling for service |
| Unlike end-suction pumps, in-line pumps allow the use of straight pipe work, which often results in reductions in installation cost and amount of space occupied |
| The impeller is hydraulically and mechanically balanced to increase the life of motor bearings and shaft seals |
| Pump housing and pump head/motor stool are electro-coated |
| Improved corrosion resistance |
| Industry standard flange-to-flange dimensions for easy retrofit applications |
| Stainless steel impeller and seal ring for extended pump life |
| TP pumps are fitted with high-efficiency motors |
| Oversize motor pump version |
| DN40 nominal diameter of inlet and outlet port |
| Basic pump version |
| Bronze pump housing and motor stool |
| Bellow rubber shaft seal, Tungsten carbide rotating face, Carbon resin-impregnated stationary seal face and EPDM secondary seal |
| CSA Certified |
| UL Listed |
| Baldor® 84Z04957 2-Pole Motor |