if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Bradford White RE240L6-1NCZZ Lowboy Electric Water Heater, 38 gal Tank, 240 / 208 VAC, 6 kW, 1 ph Phase
BRADFORD-WHITE RE240L6-1NCZZ . 208V-4.5KW / 240V-6KW / 1PHASE WITH INSTALLED T&P VALVE
Residential Electric Tank Water Heaters
}
Bradford White RE240L6-1NCZZ Lowboy Electric Water Heater, 38 gal Tank, 240 / 208 VAC, 6 kW, 1 ph Phase
3428536
Product ID:3428536
Famous Supply
- ASME Yes/No: No
- Dimensions: 24 in Dia x 32-5/8 in
- Energy Factor: 0.91
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 21 gph
- Series: RE240L6
- Type: Lowboy
- Water Connection: 3/4 NPT in
- Tank Capacity: 38 gal
- Voltage Rating: 240 / 208
- Power Rating: 6 kw
- Phase: 1
- Tall or Short: Short
- Domestic/Import: Domestic
Residential Electric models, with their varied configurations, fit just about any location. Built for tight spaces with low headroom, Lowboy models allow you flexibility to put electric water heating where a conventional upright tank will not fit. Bradford White offers models with and without insulation blankets.
- Bradford_White_LE110U3-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE110U6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_White_RE120L101NHWW_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE120L101NHWW_Service_Manual.pdf(Service Manual)
- Bradford_White_RE120L101NHWW_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_RTV-120-L_Catalog.pdf(Catalog)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Low restriction brass drain valve: Durable tamper proof design |
| Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
| Direct heat transfer with immersed element: Transfers heat directly and efficiently to the water screw-in style |
| Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank |
| Vitraglas® lining |
| Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
| Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity and blanketed models additionally use a supplied flexible fiberglass insulation blanket |
| Water connections: 3/4 in NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections |
| Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
| Non-simultaneous operation: Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| ASHRAE 90.1b |
| CEC Listed |
| cETLus Listed |
| CSA Certified |
| Massachusetts Approved |
| NAECA Compliant |
| NSF 372 |
| UL 1453 |
| UL 174 |
| 2 in THK Insulation Blanket |
| Residential Application |