if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Milwaukee Valve HP1LCS4213 140 HP Series Lug Style Butterfly Valve With Lever, 14 in Nominal, 150 lb, Carbon Steel Body, Import
MILWAUKEE HP1LCS4213 14" ANSI CLASS 150# LUGGED STYLE HIGH PERFORMANCE BUTTEFLY VALVE WITH CARBON STEEL BODY, 316SS DISC, 17-4PH SS SHAFT, RPTFE SEAT, PTFE SEALS. COMPLETE W/MANUAL GEAR OPERATOR
Butterfly Valves
}
Brand: 
Milwaukee Valve HP1LCS4213 140 HP Series Lug Style Butterfly Valve With Lever, 14 in Nominal, 150 lb, Carbon Steel Body, Import
3377325
Product ID:3377325
Famous Supply
- Actuator Type: Gear
- Dimensions: 28.81 in H
- Disc Material: 316 Stainless Steel
- Series: HP Series
- Stem & Pin Material: 17-4PH Stainless Steel (Stem)/18-8 Stainless Steel (Taper Pin)
- Nominal Size: 14 in
- Pressure Class: 150 lb
- Body Material: Carbon Steel
- Type: Lug Style
- Domestic/Import: Import
Our high performance butterfly valves are available in sizes ranging from 2-1/2 to 24 in for class 150 ratings, and 2-1/2 to 16 in for class 300. Dependable and durable service is assured with one-piece stem and stainless steel backed reinforced PFTE bearings. Our rubber-lined butterfly valves are resilient. Seated wafer & full-lug body styles are available in sizes 2 to 48 in. Double dead end service is available from 2 to 12 in. Dead end service is available up to 24 in. All iron butterfly valves have phenolic-reinforced liners and 416 SS blowout proof stems. Liner materials include EPDM, Buna-N, FKM, Hypalon and FDA Neoprene. Disc materials include aluminum bronze, DINP, 316 SS, epoxy, and nylon coated. Operators include 10-position lever (locking standard), gear operators, and stem extensions. All Milwaukee butterfly valves can be easily automated with pneumatic or electric actuators. Our butterfly valves also meet the low lead requirement which the wetted surface (in any material combination) contacted by consumable water contains less than one quarter of a percent (.25%) of lead by weight.
- Features
- Standards & Approvals
| Double offset geometry to provide superior sealing with minimal seat contact and wear |
| Machined, tapered seat provides multiple sealing edges |
| One - piece shaft and disc designed for maximum strength and Cv |
| Internally cast disc position stop to prevent disc over travel while maintaining optimum disc/seat contact |
| Stem is centered in the adjustable stem packing by oversized bearings eliminating stem leakage and fugitive emissions |
| Disc spacers to center disc in seat to eliminate seat distortion |
| blow-out proof stem prevents injury and product loss |
| Combination mechanical and pressure energized seat design for repeatable and reliable sealing performance and extended cycle life |
| Sealing retaining ring designed for double dead end service (lug style) and allows easy removal for seat replacement |
| Stem/disc connection ensures minimal lost motion and high strength |
| Valve is rated at 150 psi steam for on and off application and 50 psi modulating service |
| ANSI/ASME B16.34/B16.5 |
| ASTM A216 Grade WCB Body |
| ASTM CF8M Disc |
| MSS-SP-55/68/61 |
| PROP65: Cancer and Reproductive Harm California Transparency in Supply Chains Act of 2010 |