if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1)) { this.Model.StructuredPageData = string.Empty; //} }

Milwaukee Valve HP1LCS4213 120 HP Series High Performance Lug Style Butterfly Valve, 12 in Nominal, Flanged End Style, 150 lb, Carbon Steel Body, PTFE Softgoods, Import

MILWAUKEE HP1LCS4213 12" ANSI CLASS 150# LUGGED STYLE HIGH PERFORMANCE BUTTEFLY VALVE WITH CARBON STEEL BODY, 316SS DISC, 17-4PH SS SHAFT, RPTFE SEAT, PTFE SEALS. COMPLETE W/MANUAL GEAR OPERATOR

Butterfly Valves }

Milwaukee Valve HP1LCS4213 120 HP Series High Performance Lug Style Butterfly Valve, 12 in Nominal, Flanged End Style, 150 lb, Carbon Steel Body, PTFE Softgoods, Import

3377322 Product ID:3377322
Famous Supply
  • Actuator Type: Gear
  • Dimensions: 24.54 in H
  • Disc Material: 316 Stainless Steel
  • Series: HP Series
  • Stem & Pin Material: 17-4PH Stainless Steel (Stem)/18-8 Stainless Steel (Taper Pin)
  • Nominal Size: 12 in
  • End Style: Flanged
  • Pressure Class: 150 lb
  • Body Material: Carbon Steel
  • Type: High Performance Lug Style
  • Softgoods Material: PTFE
  • Domestic/Import: Import
Milwaukee Valve Butterfly Valve, High Performance Lug Style, Series: HP Series, 12 in Nominal, Flanged, 150 lb, Gear Actuator, Carbon Steel Body, 316 Stainless Steel Disc, 17-4PH Stainless Steel (Stem)/18-8 Stainless Steel (Taper Pin) Stem & Pin Material, PTFE, 24.54 in H, Import
  • Features
  • Standards & Approvals
Double offset geometry to provide superior sealing with minimal seat contact and wear
Machined, tapered seat provides multiple sealing edges
One - piece shaft and disc designed for maximum strength and Cv
Internally cast disc position stop to prevent disc over travel while maintaining optimum disc/seat contact
Stem is centered in the adjustable stem packing by oversized bearings eliminating stem leakage and fugitive emissions
Disc spacers to center disc in seat to eliminate seat distortion
Blow-out proof stem prevents injury and product loss
Combination mechanical and pressure energized seat design for repeatable and reliable sealing performance and extended cycle life
Sealing retaining ring designed for double dead end service (lug style) and allows easy removal for seat replacement
Stem/disc connection ensures minimal lost motion and high strength
Stainless backed RTFE bearing
Wrought carbon steel body
Valve is rated at 150 psi steam for on and off application and 50 psi modulating service
Limit range 30 to 70 deg F, no dwell in near closed position
285 psi CWP pressure
PTFE stem packing
API 598/609B
ASME/ANSI B16.34/B16.5
ASTM A216 Body
ASTM CF8M Disc
MSS-SP-25/MSS-SP-55/MSS-SP-61/MSS-SP-68 Compliant
PROP65: Cancer and Reproductive Harm California Transparency in Supply Chains Act of 2010