if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Simpson Strong-Tie DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment
SIMPSON STRONG TIE DIA37S SHORT DROP-IN ANCHOR 3/8" X 3/4" ROD SIZE
Drop-In Anchors
}
Simpson Strong-Tie DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment
3332214
MFG #: RPS18
Product ID:3332214
Famous Supply
- Finish: Zinc Plated
- Overall Length: 3/4 in
- Shear Strength: 410 at 3000 psi for Concrete
- Tensile Strength: 335 lb at 3000 psi for Concrete
- Thread Length: 1/4 in
- Thread Size: 3/8-16
- Thread Type: UNC
- Bolt/Rod Size: 3/8 in
- Material: Carbon Steel
- Drill Size: 1/2 in
- Type: Short Threaded
Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
- Features
- Standards & Approvals
- Application
| Lipped edge (DIAS) eliminates need for precisely drilled hole depth |
| Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod |
| Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post-tensioned cables |
| Short drop-in anchors include a setting tool compatible with the anchor to ensure consistent installation |
| Anchor body meets minimum 70000 psi tensile |
| Expander plug meets minimum 50000 psi tensile strength |
| A dedicated setting tool is included |
| 2600 to 2700 deg F freezing/melting point |
| The allowable loads are based on a safety factor of 4 |
| Allowable loads may not be increased for short-term loading due to wind or seismic forces |
| Anchors were installed with a 1 in offset from the centerline of the flute |
| OSHA 29 CFR 1910.1000 |
| Federal Specification A-A-55614 |
| Type I |
| FM 3017082 |
| UL File Ex3605 |
| For flush mount applications in solid base materials |