if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Bradford White RG2DVMH30T6X Propane Gas Water Heater, 30000 Btu/hr Heating, 30 gal Tank, Home Direct Vent, 32 gph Recovery
BRADFORD-WHITE RG2DVMH30T6X . 30 GAL 30 BTU 10.0 WC PROPANE WITH INSTALLED T&P VALVE
Residential Gas Tank Water Heaters
}
Bradford White RG2DVMH30T6X Propane Gas Water Heater, 30000 Btu/hr Heating, 30 gal Tank, Home Direct Vent, 32 gph Recovery
3329238
Product ID:3329238
Famous Supply
- Dimensions: 18 in Dia x 21-5/8 in D x 57-9/16 in H
- Energy Factor: 0.6
- Gas Connection: 1/2 in
- Pressure Rating: 150 psi
- Vent Size: 3 in
- Water Connection: 3/4 in NPT
- Heating Capacity: 30000 btu/hr
- Tank Capacity: 30 gal
- Fuel Type: Propane Gas
- Vent Type: Home Direct
- Recovery Rate: 32 gph
- Ultra Low NOx: No
- Domestic/Import: Domestic
As with the energy saver atmospheric combustion model, its direct vent counterpart is also designed for mobile homes. This version takes combustion air in from outside and then vents combustion gases directly back outside.
- Bradford_RG130T6N_Warranty.pdf(Warranty Information)
- Bradford_RG2DVMH30T6X_Line_Drawing.pdf(Line Drawing)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RG2DVMH30T10X_Line_Drawing.pdf(Line Drawing)
- Bradford_White_RG2DVMH30T10X_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RG2DVMH30T10X_Specification_Sheet.pdf(Specification Sheet)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Housing and urban development: This water heater is designed in accordance with H.U.D. and is certified for installation in a manufactured home (mobile home) only and must be installed in an enclosure that will completely separate the water heater combustion and venting system from the dwelling interior |
| Sealed combustion roof jack kit |
| Flue baffle: Designed to maximize the amount of heat absorbed in the lower portion of tank, minimizes air movement in the heater during standby periods to decrease heat loss up the flue |
| Heat traps: Installed on hot water outlet to minimize heat loss through piping |
| Vitraglas® lining |
| Fully automatic controls: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
| Insulation system: 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity |
| Water connections: 3/4 in NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Low restriction brass drain valve: Durable tamper proof design |
| Convertible gas control: Easily convertible control for use with either propane or natural gas |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| ANSI Z21.10.1-2014 |
| ASHRAE 90.1b |
| CEC Listed |
| CSA 4.1-2014 |
| CSA International (Formerly AGA/CGA) |
| CSA LLC - Low Lead Compliant |
| ETLus Listed |
| HUD Certified |
| Massachusetts Approved |
| NAECA Compliant |
| NSF 372 |
| Temperature and Pressure Relief Valve |
| Residential Application |