if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Bradford White RE250S6-1NCWW Upright Electric Water Heater, 50 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase, Short
BRADFORD-WHITE RE250S6-1NCWW 50 GAL 240V 4500W 4500W 208V 3500W 3500W WITH INSTALLED T&P VALVE & INSULATION BLANKET
Residential Electric Tank Water Heaters
}
Brand: 
Bradford White RE250S6-1NCWW Upright Electric Water Heater, 50 gal Tank, 240 / 208 VAC, 4.5 kW, 1 ph Phase, Short
3329175
Product ID:3329175
Famous Supply
- ASME Yes/No: No
- Dimensions: 22 in Dia x 47 in H
- Energy Factor: 0.92
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 21 gph
- Series: RE250S6
- Type: Upright
- Water Connection: 3/4 NPT in
- Tank Capacity: 50 gal
- Voltage Rating: 240 / 208
- Power Rating: 4.5 kw
- Phase: 1
- Tall or Short: Short
- Domestic/Import: Domestic
Our line of upright electric models features the power of the Hydrojet® Total Performance System and the convenience of electricity. Available in single and double element models, these water heaters give you the power you need to heat water with electricity.
- Bradford_White_LE110U3-1NAL_Service_Manual.pdf(Service Manual)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE110U6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_White_RE240S61NAPP_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE240S61NAPP_Service_Manual.pdf(Service Manual)
- Bradford_White_RE240S61NAPP_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_RTV-120-L_Catalog.pdf(Catalog)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
| Low restriction brass drain valve: Durable tamper proof design |
| Direct heat transfer with immersed element: Transfers heat directly and efficiently to the water screw-in style |
| Screw-in style element |
| Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank |
| Vitraglas® lining |
| Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
| Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity |
| Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections |
| Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
| Non-simultaneous operation |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| ASHRAE 90.1b |
| CEC Listed |
| cETLus Listed |
| CSA Certified |
| Massachusetts Approved |
| NAECA Compliant |
| NSF 372 |
| UL 1453 |
| UL 174 |
| 2 in THK Insulation Blanket |
| Residential Application |