if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Burnham PIN7SNI-ME2 Independence Packaged Gas-Fired Steam Boiler, Natural Gas Fuel, 150 mbh Net IBR, 210 mbh Input, Chimney Vent, Cast Iron, Electronic Ignition, Domestic
BURNHAM PIN7SNI-ME2 INDEPENDENCE PACKAGED BOILER STEAM ONLY, SPARK IGNITION 210MBH, NAT GAS WITH STEAM TRIM KIT!!
Hydronic Residential Gas Fired Boilers
}
Burnham PIN7SNI-ME2 Independence Packaged Gas-Fired Steam Boiler, Natural Gas Fuel, 150 mbh Net IBR, 210 mbh Input, Chimney Vent, Cast Iron, Electronic Ignition, Domestic
3268466
MFG #: PIN7SNI-ME2
Product ID:3268466
Famous Supply
- AFUE Rating: 82.1
- Amperage Rating: 12
- Dimensions: 27-1/2 in W x 36-3/4 in D x 40 in H
- DOE Heating Capacity: 173
- Flue Outlet Size: 7 in Dia x 15 ft H
- Mounting Type: Floor
- Series: Independence®
- Voltage Rating: 120
- Water/Steam Content: 10.7 gal
- Fuel Type: Natural Gas
- Input Capacity: 210 mbh
- Vent Type: Chimney
- Housing Material: Cast Iron
- Ignition Type: Electronic
- Domestic/Import: Domestic
The Independence® is a residential, gas-fired boiler for steam systems. It is available for either natural or LP gas and has AFUE ratings of up to 82%. Its large water volume and durable cast iron sections make it an ideal replacement for even the most challenging steam heating system. Standard equipment on the Independence® includes cast iron push nipples that provide a permanent, watertight seal between sections, Honeywell operating controls, vent damper and a rugged steel base assembly. A deluxe, insulated, powder-coated steel jacket completely encloses gas valves and burners and reduces boiler heat loss. The exclusive Independence® PV models have been specifically configured to operate as direct vented products for installation in homes with a damaged or irreparable chimney.
- Features
- Warranty
- Standards & Approvals
- Includes
| Rugged cast iron heat exchanger |
| Stainless steel burners |
| 10 sizes to meet your specific needs |
| Optimum venting flexibility |
| Step-opening gas valve |
| Low profile draft hood |
| Independence® - chimney vented, equipped with fuel saving vent damper and low profile rear draft hood which accommodates low overhead areas and permits flexibility of installation with existing heating system piping |
| For installation from less than 2000 ft elevation |
| 1 Year Limited on Boiler/10 Years Limited on Heat Exchanger/1 Year Limited on Parts |
| AHRI Certified |
| ASME Specified |
| cETLus Listed |
| USA - National Fuel Gas Code ANSI Z223.1/NFPA 54 |
| Intermittent Ignition, PSE802 Float Low Water Cut-Off, Damper and 1 in Burner |