if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
System Sensor Innovair Flex RTS2-AOS Multi-Signaling Unit, LED Display, 85 dB at 10 ft
SYSTEM SENSOR RTS2-AOS REMOTE TEST ACCESORY WITH ADD ON STROBE
Smoke Detector Alarms
}
System Sensor Innovair Flex RTS2-AOS Multi-Signaling Unit, LED Display, 85 dB at 10 ft
3170820
Product ID:3170820
Famous Supply
- Color: White
- Dimensions: 5.3 in H x 4.8 in W x 1.6 in D
- Humidity Rating: 95%
- Operating Temperature: 14 to 140 deg f
- Display Type: LED
- Audible Alert: 85 dB at 10 ft
The National Fire Protection Association (NFPA) has published codes, standards, and recommended practices for the installation and use of this product. It is recommended that the installer be familiar with theses requirements, with local codes, and any special requirements of the local authority having jurisdiction. For further information, consult NFPA 72 and 90 A requirements. The system sensor RTS2 and RTS2-AOS multi-signaling accessories are designed for use with system sensor InnovairFlex 4-wire conventional duct smoke detectors only. The accessory has two bi-colored LEDs that indicate the sensor status of up to two connected duct smoke detectors. The key switch on the unit can be used to select a connected duct detector sensor (either sensor 1 or sensor 2), and the selected sensor can be tested or both sensors can be reset simultaneously using the test/reset button. LED status indications include, standby (green blink), trouble (amber), maintenance (amber blink) and alarm (red). With the key switch selected, there is also the capability of obtaining a sensitivity measurement of the selected sensor using the SENS-RDR sensitivity reader (sold separately).
- Features
- Standards & Approvals
- Includes
| RTS2-AOS is a multi-signaling accessory, with strobe, designed to work with InnovairFlex 4-wire conventional duct smoke detectors, AOS stands for Add On Strobe |
| Standby (green blink), trouble (amber), maintenance (amber blink) and alarm (red) LEDs to indicate detector status |
| Keyswitch to select desired sensor, enable test/reset button and sensitivity reading |
| Test/reset button |
| Selectable continuous or temporal tone |
| AOS add on strobe (included on RTS2-AOS model) |
| Provisions for single or double gang box mounting |
| Ability to discretely monitor two sensors when duct smoke detectors are configured in a 2 to 1 set up (See InnovairFlex duct smoke detector manual for reference) |
| Sounder 85 dBA at 10 ft |
| 20 to 29 VDC |
| Strip terminal, 22 to 14 AWG wire connections |
| FM Approved |
| UL 268 and ULC S529-02 |
| (1) RTS2 or RTS2-AOS Multi-Signaling Accessory, (1) Mounting Hardware Kit (Contains (2) Sets of Mounting Screws and (1) Tamper-Resistant Outer Cover Mounting Screw |