if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Oatey FlowGuard Gold 31918 1-Step All Weather Low VOC Medium Body CPVC Cement With Ultraviolet Indicator, Yellow
OATEY 31918 16OZ FLOWGUARD GOLD W/UV DETEC
Plastic Cements
}
Oatey FlowGuard Gold 31918 1-Step All Weather Low VOC Medium Body CPVC Cement With Ultraviolet Indicator, Yellow
3136962
MFG #: 31918
Product ID:3136962
Famous Supply
- Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
- Curing Time: 1 or 6 hr
- Odor/Scent: Solvent
- Setting Time: 4 to 5 min
- Temperature Rating: 0 to 115 deg f
- Container Size: 16 oz
- Type: 1-Step All Weather Low VOC Medium Body
- Color: Yellow
- Suitable For Use With: Upto 2 in Dia CPVC Hot and Cold Potable Water Pipe and Fittings
Oatey® FlowGuard Gold® CPVC Cement, 1-Step All Weather Low VOC Medium Body, 16 oz Container, For Use With: Upto 2 in Dia CPVC Hot and Cold Potable Water Pipe and Fittings, Yellow, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 1 or 6 hr Curing, 0 to 115 deg F
- Features
- Standards & Approvals
| For cold water systems and hot water systems up to 200 deg F |
| Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements |
| May be used without primer where local codes permit |
| FlowGuard Gold® is a registered trademark of The Lubrizol Corporation |
| When solvent cement is applied properly, the yellow formula will glow blue under ultraviolet light |
| 4 to 5 min (3 to 5 deg F)/2 to 3 min (5 to 7 deg F)/1 to 2 min (7 to 9 deg F) setting |
| 400 psi (2 hr at 73 deg F) hydrostatic burst strength |
| Minimum 500 cps at 73 deg F +/- 2 deg F viscosity |
| 1 hr Cold/6 hr hot water above 6 deg F curing |
| ASTM F493 |
| IAPMO Listed |
| NSF 61 for PW |
| DWV and Sewer Waste |