if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Luxaire TG8S100B12MP11 1-Stage Gas Furnace, Natural Gas, 100000 Btu/hr Input, 80000 Btu/hr Output, 115 VAC, 80 % AFUE, 1200 cfm, PSC Blower Motor
LUXAIRE TG8S100B12MP11 ## GAS FURNACE 80% SINGLE STAGE PSC MOTOR MULTI-POSITION 33" TALL 100,000 BTU 1200 CFM ##While Supplies Last##
Gas Furnaces
}
Luxaire TG8S100B12MP11 1-Stage Gas Furnace, Natural Gas, 100000 Btu/hr Input, 80000 Btu/hr Output, 115 VAC, 80 % AFUE, 1200 cfm, PSC Blower Motor
3093539
MFG #: TG8S100B12MP11
Product ID:3093539
Famous Supply
- Connection Size: 1/2 in
- Dimensions: 17-1/2 in L x 29-1/2 in W x 33 in H
- Fuse Size: 15 a
- Ignition Type: Direct
- Motor HP: 1/3
- Series: Climasure
- Type: 1-Stage
- Furnace Position: Multi-Position
- Low NOX: No
- Gas Type: Natural Gas
- Input Capacity: 100000 btu/hr
- Output Capacity: 80000 btu/hr
- Voltage Rating: 115
- AFUE Rating: 80
- Flow Rate: 1200 cfm
- Motor Type: Multi-Speed PSC Blower
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications. These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation. These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.
- Features
- Warranty
- Standards & Approvals
- Application
| 40 to 70 deg F rise air temperature |
| 190 deg F maximum outlet temperature |
| Compact, easy to install, ideal 33 in H tall cabinet |
| Blower-off delay for cooling SEER improvement |
| Easy access to controls to connect power/control wiring |
| Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation |
| Low unit amp requirement for easy replacement application |
| Electronic hot surface ignition saves fuel cost with increased dependability and reliability |
| 100% shut off main gas valve for extra safety |
| 4 speed, direct drive PSC motor |
| 24 V, 40 VA control transformer and blower relay supplied for add-on cooling |
| Hi-tech tubular aluminized steel primary heat exchanger |
| Timed on, adjustable off blower capability for maximum comfort |
| Blower door safety switch |
| Airflow leakage less than 1% of total airflow at duct performance testing conditions |
| Movable duct connector flanges for application flexibility |
| Quiet inducer operation |
| Inducer rotates for easy conversion of venting options |
| Fully supported blower assembly for easy access and removal of blower |
| 20 Years Limited on Heat Exchangers, 10 Years Limited on Heat Exchangers in Commercial Applications, Standard 5 Years Limited Parts |
| AHRI Certified |
| CSA Certified |
| Design Certified |
| Residential Application |