if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
1/2 HP Automatic Effluent/Dewatering Submersible Pump
ZOELLER 98-0001 M-98 SUMP PUMP 115/1/60, 1/2 HP, AUTOMATIC DEWATERING SUMP PUMP 3 YEAR WARRANTY 9' CORD
Submersible Sump Pumps
}
Brand: 
1/2 HP Automatic Effluent/Dewatering Submersible Pump
3045800
MFG #: 98-0001
Product ID:3045800
Famous Supply
- Amperage Rating: 9.4
- Bearing Type: Oil Fed
- Dimensions: 12-1/16 in H x 10-1/8 in W
- Frequency Rating: 60
- Impeller Type: Non-Clogging Vortex
- Maximum Head: 23 ft
- Motor Speed: 1725 rpm
- Series: Flow-Mate M98
- Temperature Rating: 130 deg f
- Type: Automatic
- Voltage Rating: 115/230
- Flow Rate: 73 gpm
- Outlet Size: 1-1/2 in
- Phase: 1
- Horsepower: 1/2
- Material: Cast Iron
This Flow-Mate model submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This durable cast iron pump includes a epoxy powder coated finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump, making it one of the most reliable in the industry.
- Features
- Standards & Approvals
- Application
| Float operated 2-pole mechanical switch |
| Corrosion-resistant, powder coated epoxy finish |
| No sheet metal parts to rust or corrode |
| Stainless steel screws, guard, handle, arm and seal assembly |
| No screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housing |
| Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection |
| Watertight neoprene square ring between motor and pump housing |
| Cast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft seal |
| Entire unit pressure-tested after assembly |
| Class B insulation, 9-1/2 in/3 in auto On/Off points |
| 1/2 in spherical solid handling, 15 ft cord, oil filled cooling |
| Auto reset thermal overload motor protection |
| Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket |
| AISI 1215 cold roll steel motor shaft |
| 1-1/2 in NPT discharge |
| CSA/US Certified |
| SSPMA Certified |
| UL Listed |
| Dewatering (Sump), Enhanced Flow Step Systems, Low Pressure Pipe (LPP) and Septic Tank |