if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Tomahawk 524-10C Metal Hanger Strip, 10 ft L x 3/4 in W, Copper Plated, Domestic
SIOUX 524-10C 3/4" X 10' COIL, COPPER PLATED HANGER STRAP
Hanger Strapping
}
Brand: Sioux Chief
Tomahawk 524-10C Metal Hanger Strip, 10 ft L x 3/4 in W, Copper Plated, Domestic
2943009
MFG #: 524-10C
Product ID:2943009
Famous Supply
- Gauge: 24 ga Steel
- Material: 24 ga
- Series: 524
- Length: 10 ft
- Width: 3/4 in
- Finish: Copper Plated
- Domestic/Import: Domestic
Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized or copper-plated steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 in or 3/16 in pre-drilled pilot holes in alternating pattern and strap shall be 3/4 in wide.
- Features
| Installation: wear gloves and eye protection when handling metal hanger strap to avoid injury |
| Cut hanger strap to desired L, using approved hardware (not provided), secure hanger strap with nail or screw to joist or stub member |
| Hanger strap may be looped or double wrapped around piping and may be installed on same side or opposite side of floor joist or stub member |
| 750 lb maximum load rating |
| 250 degree F safe working temperature |
| 1 in center lines |
| Wear gloves and eye protection when handling metal hanger strap to avoid injury |
| Cut hanger strap to desired L |
| Using approved hardware (not provided), secure hanger strap with nail or screw to joist or stub member |
| Alternating 1/4 and 3/16 in hole |
| 24 ga steel |