if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Duro Dyne Rapit 8085 Regulator Set, Steel, Galvanized, Domestic
DURODYNE 8085 RS256 RAPIT REGULATOR 2 SPRING BEARINGS 1 WASHER HANDLE AND WING NUT (10/bx 10bx/ct)
Duct Damper Regulators
}
Duro Dyne Rapit 8085 Regulator Set, Steel, Galvanized, Domestic
146086
MFG #: 8085
Product ID:146086
Famous Supply
-
Material:
Steel
-
Finish:
Galvanized
-
Domestic/Import:
Domestic
The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit will penetrate and secure to round or rectangular damper blades up to 24 gauge steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
Slip the bearing over the edge of the damper at the bearing line |
Lay the assembly on any firm surface and rap the prong with a hammer |
One blow drives the prong through the damper blade, holding it securely to the damper |
When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the rapit bearing |
(2) RB-50 Rapit® Spring Bearings, (1) RP-3 Washer, (1) RP-1 Handle, (1) RP-2 Wing Nut |