if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Bradford White RG2PV75H6N-264 Natural Gas Water Heater, 76000 Btu/hr Heating, 75 gal Tank, Power Vent, 82 gph Recovery, Aluminum Anode
BRADFORD-WHITE RG2PV75H6N19-264 . 75 GAL 76 BTU 4.0 WC W/ALUM ANODE WITH INSTALLED T&P VALVE
Residential Gas Tank Water Heaters
}
Bradford White RG2PV75H6N-264 Natural Gas Water Heater, 76000 Btu/hr Heating, 75 gal Tank, Power Vent, 82 gph Recovery, Aluminum Anode
3380971
Product ID:3380971
Famous Supply
- Dimensions: 26 in Dia x 30-11/16 in D x 69-7/16 in H
- Energy Factor: 0.69
- Gas Connection: 1/2 in
- Ignition Type: Pilot
- Pressure Rating: 150 psi
- Vent Size: 3 x 4 in
- Water Connection: 3/4 in NPT
- Heating Capacity: 76000 btu/hr
- Tank Capacity: 75 gal
- Fuel Type: Natural Gas
- Vent Type: Power
- Recovery Rate: 82 gph
- Ultra Low NOx: No
- Domestic/Import: Domestic
Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.
- Bradford_White_LG1PV55H783N_Service_Manual.pdf(Service Manual)
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U6-1NAL_Warranty.pdf(Warranty Information)
- Bradford_White_RG1PV40S10N_Line_Drawing.pdf(Line Drawing)
- Bradford_White_RG1PV40S10N_Specification_Sheet.pdf(Specification Sheet)
- Bradford_White_RG1PV55H6N_Line_Drawing.pdf(Line Drawing)
- Bradford_White_RG1PV55H6N_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RG1PV55H6N_Service_Manual.pdf(Service Manual)
- Bradford_White_RG1PV55H6N_Specification_Sheet.pdf(Specification Sheet)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC) |
| Enhanced performance: Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials |
| Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels |
| Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting |
| Power vent water heater: Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall |
| Powerful blower motor: Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations |
| Horizontal and vertical venting: PVC, ABS or CPVC |
| Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater |
| Flammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detected |
| Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions |
| Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner |
| Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank |
| Vitraglas® lining |
| Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity |
| Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections |
| Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
| Low restriction brass drain valve: Durable tamper proof design |
| Aluminum anode rod |
| 6 Years Limited on Tank/6 Years Limited on Component Parts |
| AHRI Certified |
| ANSI Z21.10.3-2015 |
| ASHRAE 90.1b |
| CEC Listed |
| CSA 4.3-2015 |
| CSA International (Formerly AGA/CGA) |
| CSA LLC - Low Lead Compliant |
| Massachusetts Approved |
| NSF 372 |
| 10 ft 120 VAC Power Cord |
| Residential Application |