if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1)) { this.Model.StructuredPageData = string.Empty; //} }

Bradford White RG2PDV50S6X Propane Gas Water Heater, 38000 Btu/hr Heating, 50 gal Tank, Power Direct Vent, 43 gph Recovery

BRADFORD-WHITE RG2PDV50S6X . **WhileSuppliesLast-AllSalesFinal** 50 GAL 38 BTU 10.0 WC PROPANE WITH INSTALLED T&P VALVE

Residential Gas Tank Water Heaters }

Bradford White RG2PDV50S6X Propane Gas Water Heater, 38000 Btu/hr Heating, 50 gal Tank, Power Direct Vent, 43 gph Recovery

3329247 Product ID:3329247
Famous Supply
  • Dimensions: 24 in Dia x 34-3/8 in D x 60-7/8 in H
  • Energy Factor: 0.68
  • Gas Connection: 1/2 in
  • Ignition Type: Pilot
  • Pressure Rating: 150 psi
  • Vent Size: 2 x 3 in
  • Water Connection: 3/4 in NPT
  • Heating Capacity: 38000 btu/hr
  • Tank Capacity: 50 gal
  • Fuel Type: Propane Gas
  • Vent Type: Power Direct
  • Recovery Rate: 43 gph
  • Ultra Low NOx: No
  • Domestic/Import: Domestic
Power Direct Vent models are the solution to installations that lack sufficient air for combustion and require installation flexibility. All models can vent vertically or horizontally and are also approved for direct-vent, closed combustion applications.
  • Features
  • Warranty
  • Standards & Approvals
  • Includes
  • Application
Bradford White® ICON System™: intelligent gas control with proven millivolt powered technology and built-in piezo igniter
Enhanced performance
Advanced temperature control system
Intelligent diagnostics
Separate immersed thermowell
Closed combustion venting system: Power direct vent models are ideal for installations which lack sufficient are for combustion, such as new construction homes or additions which are tightly insulated, these models use a twin pipe system where combustion air is drawn from outside the building in one pipe, and combustion products are expelled to the outside in another pipe
Cast aluminum air intake boot: A cast molded air intake boot design provides exceptional durability during installation and operation
Horizontal and vertical venting
Flammable vapor sensor
Factory installed Hydrojet® sediment reduction system and FVIR defender safety System®
Vitraglas® lining
Insulation system
Water connections: 3/4 in NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
Factory installed heat traps
Protective magnesium anode rod
Low restriction brass drain valve
Power direct vent gas water heater
Hydrojet® total performance system
6 Years Limited on Tank/6 Years Limited on Component Parts
AHRI Certified
ANSI Z21.10.1-2014
ASHRAE 90.1b
CEC Listed
CSA 4.1-2014
CSA International (Formerly AGA/CGA)
CSA LLC - Low Lead Compliant
EnergyStar® Certified
Massachusetts Approved
NAECA Compliant
NSF 372
Temperature and Pressure Relief Valve
Residential Application