if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
40 Gallon Lowboy Electric Water Heater, 208-240/60/1, 4.5 kW
BRADFORD-WHITE RE240L6-1NCWW 38 GAL 240V 4500W 4500W 208V 3500W 3500W WITH INSTALLED T&P VALVE FL-TOP 32-3/8 DIA 24
Residential Electric Tank Water Heaters
}
Brand: 
40 Gallon Lowboy Electric Water Heater, 208-240/60/1, 4.5 kW
3329171
MFG #: RE240L6-1NCWW
Product ID:3329171
Famous Supply
- ASME Yes/No: No
- Dimensions: 32-3/8 x 24 in
- Energy Factor: 0.91
- Heating Element: Screw-In Copper
- Pressure Rating: 150 psi
- Recovery Rate: 21 gph
- Series: RE2-L-INCWW
- Type: Lowboy
- Water Connection: 3/4 in
- Tank Capacity: 38 gal
- Voltage Rating: 208-240/60/1
- Power Rating: 4.5 kw
- Phase: 1
- Tall or Short: Short
Residential Electric models, with their varied configurations, fit just about any location. Built for tight spaces with low headroom, Lowboy models allow you flexibility to put electric water heating where a conventional upright tank will not fit. Bradford White offers models with and without insulation blankets.
- Bradford_White_MS120R6SS1NAN_Warranty.pdf(Warranty Information)
- Bradford_White_RE110U61NAL_Manual.pdf(Instruction Installation Manual)
- Bradford_White_RE120L101NHWW_Line_Drawing.pdf(Parts)
- Bradford_White_RE120L101NHWW_Service_Manual.pdf(Service Manual)
- Bradford_White_RE120L101NHWW_Specification_Sheet.pdf(Specification Sheet)
- Features
- Warranty
- Standards & Approvals
- Includes
- Application
| Low restriction brass drain valve: Durable tamper proof design |
| Fully automatic thermostat control: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety |
| Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water |
| Factory installed hydrojet® total performance system: Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank |
| Vitraglas® lining |
| Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F |
| Insulation system: Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss |
| *Models include supplied insulation blanket (2" thick). Dimensions in charts above do not include blanket thickness. |
| Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation |
| Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service |
| Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency |
| Non-simultaneous operation: Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory |
| 6 Year Limited Tank Warranty / 6 Year Limited Warranty on Component Parts |
| AHRI Certified |
| CEC Listed |
| CSA Certified |
| ETL Listed |
| Massachusetts Approved |
| NSF 372 |
| UL 1453 |
| Temperature and Pressure Relief Valve |
| Residential Application |