if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
WERNER 6206 6200 Type IA Step Ladder, 6 ft H Ladder, 300 lb Load, 5 Steps, Fiberglass, A14.5
WERNER 6206 6' FIBERGLASS STEPLADDER (ORANGE) TYPE IA 300#
Step Ladders
}
Brand: 
WERNER 6206 6200 Type IA Step Ladder, 6 ft H Ladder, 300 lb Load, 5 Steps, Fiberglass, A14.5
566272
MFG #: 6206
Product ID:566272
Famous Supply
- Base Spread: 41-1/4 in
- Bottom Width: 23-3/8 in
- Series: 6200
- Type: Type IA
- Ladder Height: 6 ft
- Load Capacity: 300 lb
- ANSI Code: A14.5
- Material: Fiberglass
- Number of Steps: 5
The 6206 Fiberglass 6 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
- Features
- Standards & Approvals
| Holster top is now ToolLasso ready |
| Back-up plates reinforce all top connectors |
| Shoulder bolt and nut on top hinge |
| 4 rivets attach top to each front rail |
| All steps and two rear horizontals are knee braced |
| Double riveted, slip-resistant TRACTION-TRED® steps |
| Heavy duty internal spreaders |
| Full set of rear horizontals spaced one per foot |
| Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage |
| Every rivet backed up by metal plate or washer to protect rails |
| Optional yellow molded pail shelf kit, model no, 76-2 |
| Energy diffusing geometry |
| 3-1/8 in front wide x 1-7/8 in rear wide rail |
| 1-3/16 in front wide x 1-3/16 in rear back wide flange |
| ANSI A14.5 (2007), OSHA Standard |