if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Zoeller 57-0001 Mighty-Mate M57 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron
ZOELLER 57-0001 M57 "MIGHTY MATE" CAST IRON PUMP 1/3 HP, 115 V, 1-1/2" DISCHARGE
Submersible Sump Pumps
}
Zoeller 57-0001 Mighty-Mate M57 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron
748985
MFG #: 57-0001
Product ID:748985
Famous Supply
- Amperage Rating: 9.7
- Bearing Type: Sleeve
- Cord Type: 3-Wire
- Dimensions: 10.0625 in H x 10.06 in W
- Frequency Rating: 60
- Impeller Type: Non-Clogging Vortex
- Maximum Head: 19-1/4 ft
- Motor Speed: 1550 rpm
- Series: Mighty-Mate M57
- Temperature Rating: 130 deg f
- Type: Automatic
- Voltage Rating: 115
- Flow Rate: 43 gpm
- Outlet Size: 1-1/2 in
- Phase: 1
- Horsepower: 3/10
- Material: Cast Iron
The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.
- Features
- Standards & Approvals
- Application
| Corrosion-resistant, powder coated epoxy finish |
| No sheet metal parts to rust or corrode |
| Stainless steel screws, switch arm, guard and handle |
| No screens to clog, watertight, neoprene square ring between motor and pump housing |
| Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor |
| Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal |
| Watertight and dust tight, permanently oiled bearings |
| Stainless steel guard and handle, lower and upper bearings, oil-fed, cast iron, cast iron impeller, carbon and ceramic shaft seal |
| Entire unit pressure-tested after assembly |
| Class B insulation, 7-1/4 in/3 in auto On/Off points |
| 1/2 in spherical solid handling, 9 ft cord, oil filled cooling |
| Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket |
| AISI 1215 cold roll steel motor shaft |
| Single phase, shaded pole, 3 wire cord and plug |
| 1-1/2 in NPT discharge |
| CSA/US Certified |
| SSPMA Certified |
| UL Listed |
| Dewatering (Sump), Enhanced Flow Step Systems, Low Pressure Pipe (LPP) and Septic Tank |