if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Zoeller 152-0005 High Head Dose-Mate 150 Single Seal Effluent Pump, 77 gpm Max Flow, Automatic, 38 ft Max Head, 115 VAC, 1 ph
ZOELLER 152-0005 BN-152 SUBMERSIBLE PUMP 1/4 HP 115/1/44GPM @ 20' PIGGYBACK VARIABLE LEVEL FLOAT SWITCH
Effluent Pumps
}
Zoeller 152-0005 High Head Dose-Mate 150 Single Seal Effluent Pump, 77 gpm Max Flow, Automatic, 38 ft Max Head, 115 VAC, 1 ph
166358
MFG #: 152-0005
Product ID:166358
Famous Supply
-
Amperage Rating:
8.5
-
Bearing Type:
Sleeve Upper/Ball Lower
-
Dimensions:
12-1/8 in H
-
Frequency Rating:
60
-
Horsepower:
4/10
-
Impeller Type:
Engineered Thermoplastic Non-Clog Vortex
-
Material:
Cast Iron
-
Motor Speed:
3450 rpm
-
Outlet Size:
1-1/2 in NPT
-
Series:
High Head Dose-Mate 150
-
Temperature Rating:
130 deg f
-
Type:
Single Seal
-
Maximum Flow Rate:
77 gpm
-
Maximum Head:
38 ft
-
Voltage Rating:
115
-
Phase:
1
This is our fastest growing line of effluent pumps. The 150 series is truly a workhorse designed for reliability under extreme conditions in an effluent environment. 150 series pump curves cover a wide range of applications. They are well suited to applications with low pressure pipe (LPP) and enhanced flow STEP systems. Zoeller® cool run design and corrosion resistant, epoxy powder coated finish, in addition to the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.
-
Features
-
Standards & Approvals
-
Includes
-
Application
Corrosion resistant, powder coated epoxy |
Stainless steel lifting handle |
Assembled with stainless steel bolts |
4/10 hp, passes 3/4 in spherical solids |
Oil filled, hermetically-sealed, automatic reset thermal overload protected motor |
Carbon/ceramic seals |
Upper sleeve bearing and lower ball bearing running in bath of oil |
20 ft, UL listed power cord with molded, 3-wire plug |
1-1/2 in NPT vertical discharge |
For septic tank, low pressure pipe (LPP) and enhanced flow STEP systems |
Over 130 deg F special quotation required |
cCSAus Certified |
SSPMA Certified |
UL Listed |
20 ft Piggyback Variable Level Pump Switch |
Step/Onsite and Light Commercial Dewatering Applications |