if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Astro 2 Re-Circulation System, 18 gpm Flow Rate, 115 VAC
ARMSTRONG-PUMP ASTRO 230-SS-TA RECIRCULATING PUMP W/TIMER STAINLESS STEEL 110223B-148
Hot Water Recirculating Pumps
}
Astro 2 Re-Circulation System, 18 gpm Flow Rate, 115 VAC
3516092
MFG #: 110223B-148
Product ID:3516092
Famous Supply
- Amperage Rating: 0.81 A
- Impeller Type: Noryl®
- Maximum Head: 40 ft
- Maximum Pressure: 150 psi
- Power Rating: 97 W
- Series: Astro 2
- Flow Rate: 18 gpm
Armstrong Fluid Technology, 110223b-148, Re-Circulation System, Series: Astro 2, 18 gpm Flow Rate, 5 ft Maximum Head, 97 W Power, 115 VAC, 0.81 A, 60 Hz Frequency, 150 psi Maximum, Noryl® Impeller, 230 deg F, Ceramic Bearing, 6.38 in H x 6.49 in W Dimensions. The Armstrong Astro 2 hot water re-circulation system automatically circulates water through domestic water pipes. This ensures that hot water is available instantly at every tap throughout a residence. From a cost and environmental point of view, far less water is wasted each time a hot water faucet is opened - saving an average of 12,000 gallons of water annually for a typical four-person household. Ideal for retrofit applications.
- Features
- Warranty
| System components are compact, rugged, quiet and reliable |
| Stainless steel pump casing |
| Ceramic pump shaft and bearings Meets building code requirements (where applicable) 150 psi Maximum working pressure 230 deg F Maximum water temperature 40 ft Maximum head 18 gpm Maximum flow Aquastat signals circulator to operate only when the water has cooled Low temperature switchpoint, 85 deg F ± 10% High temperature switchpoint, 105 deg F ± 10% Timer ensures availability of hot water when needed 12 hr analog clock with am/pm indication 3 position slide switch, On / Off / Auto 6 ft power cord, molded duplex plug with ground |
| Meets building code requirements (where applicable) |
| 150 psi Maximum working pressure |
| 230 deg F Maximum water temperature |
| 40 ft Maximum head |
| 18 gpm Maximum flow |
| Aquastat signals circulator to operate only when the water has cooled |
| Low temperature switchpoint, 85 deg F ± 10% |
| High temperature switchpoint, 105 deg F ± 10% |
| Timer ensures availability of hot water when needed |
| 12 hr analog clock with am/pm indication |
| 3 position slide switch, On / Off / Auto |
| 6 ft power cord, molded duplex plug with ground |
| 5 Years |