if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1)) { this.Model.StructuredPageData = string.Empty; //} }

Grundfos 98548109 CMBE Compact Multi-Stage Centrifugal Booster Pump With Integrated Variable Frequency Drive, 1 in NPT Inlet x 1 in NPT Outlet, 3/4 hp Power Rating, 200 to 240 VAC, 1 ph, 304 Stainless Steel, 360 to 4000 rpm Motor

GRUNDFOS 98548109 COMPACT BOOSTER 200-240V CMBE 1-44 IUCEDE

Multi-Stage Booster Pumps & Systems
Brand: Grundfos logo
}

Grundfos 98548109 CMBE Compact Multi-Stage Centrifugal Booster Pump With Integrated Variable Frequency Drive, 1 in NPT Inlet x 1 in NPT Outlet, 3/4 hp Power Rating, 200 to 240 VAC, 1 ph, 304 Stainless Steel, 360 to 4000 rpm Motor

3465457 Product ID:3465457
Famous Supply
  • Dimensions: 12.83 in L x 8.54 in W x 17.32 in H
  • Enclosure Type: IP55
  • Flow Rate: 8.81 gpm
  • Frequency Rating: 50
  • Impeller Type: (3) 304 Stainless Steel
  • Maximum Head: 44 m
  • Maximum Suction Lift: 5.95 ft
  • Mounting Type: Horizontal
  • Series: CMBE
  • Temperature Rating: 122 deg F Ambient
  • Type: Compact Multi-Stage
  • Inlet Size: 1 in NPT
  • Outlet Size: 1 in NPT
  • Power Rating: 3/4 hp
  • Voltage Rating: 200 to 240
  • Phase: 1
  • Material: 304 Stainless Steel
  • Motor Speed: 360 to 4000 rpm
The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications. The CMBE series is available in both (1) 110 to 120 VAC and (1) 200 to 240 VAC variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation and energy savings. Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation.
  • Features
  • Standards & Approvals
  • Includes
Constant pressure via integrated speed control
Robust, stainless steel design
Easy installation
Low energy consumption
Dry running protection
Noise level below 55 dBA and even lower at controlled speed
Five way fitting with non-return valve
Diaphragm tank
Pressure gauge
Pressure sensor
High-efficiency motor with frequency converter (IP55)
Without cable and plug
O-ring shaft seal with fixed driver, silicon carbide rotating seal face, silicon carbide stationary seal face and EPDM secondary seal
AISI 304 Impeller
CE Certified
cULus Listed
85900700 1 ph Motor