if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
3/8 in Mini Hammer Arrester, Compression x Female Compression
SIOUX 660-GTR1(B) LEAD-FREE MINI-RESTOR 3/8" COMPRESSION X 3/8" COMPRESSION
Water Hammer Arresters
}
Brand: Sioux Chief
3/8 in Mini Hammer Arrester, Compression x Female Compression
3293093
MFG #: 660-GTR1(B)
Product ID:3293093
Famous Supply
- Body Material: Stainless Steel
- Dimensions: 4 in L
- Series: 660-GTR
- Temperature Rating: 250 deg f
- Type: Mini
- Nominal Size: 3/8 in
- End Style: Compression x Female Compression
- Pressure Rating: 350 psig
Sioux Chief 660 Series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer's instructions.
- Features
- Standards & Approvals
| Straight sweat arresters are compatible with press-fitting systems, such as Viega® ProPress™ and all push-fitting systems |
| Straight compression arresters install on any 1/2 in nominal copper leg or riser and are especially popular in retrofitting 1/2" nom air chambers |
| Straight MIP thread arresters install on any new rough-in or retrofit installation with 1/2 in FIP fittings |
| Straight CPVC solvent weld arresters install on 1/2 in CPVC tube or fittings in rough-in or retrofit applications |
| Straight - PEX MiniResters™ are available with F1807, F1960 and Viega® PexPress® connections |
| Straight - products marked with the No Leadicon comply with national, no lead product material requirements and also comply with NSF 61, which allows the product to contain no more than 0.25 percent lead |
| Straight - all MiniResters™ are AA size |
| Tee - full slip tee sweats in-line on 1/2 in CTS near problem valve or fixture |
| Tee - hose tee arresters install on washing machine supply valves or directly to washing machine |
| Tub/shower tee - sweat branch arresters install easily on sweat tub/shower valves |
| 304 stainless steel body |
| ANSI/ASSE 1010-2004 |
| PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm For more information go to www.P65Warnings.ca.gov |