if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Cleanfit Blue Monster Non-Toxic Thread Seal Tape, 1429 in L x 1 in W x 0.0035 in THK, PTFE
MILL-ROSE 70887 1" X 1429" BLUE MONSTER THREAD SEAL TAPE 27 PER CASE
Teflon - PTFE Thread Seal Tapes
}
Cleanfit Blue Monster Non-Toxic Thread Seal Tape, 1429 in L x 1 in W x 0.0035 in THK, PTFE
3092775
MFG #: 70887
Product ID:3092775
Famous Supply
- Color: Blue
- Maximum Operating Temperature: 500 deg f
- Minimum Operating Temperature: -400 deg f
- Pressure Rating: 10000 psi
- Type: Non-Toxic
- Length: 1429 in
- Width: 1 in
- Thickness: 0.0035 in
- Material: PTFE
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
- Features
- Standards & Approvals
- Application
| Compatible with a broad range of gases and liquids |
| Compatible with a broad range of piping materials will not harden or crack on the joints |
| Effective across a broad range of temperatures and pressures |
| Acts as a thread lubricant and anti-seize |
| Prevents electrolytic corrosion of threads |
| No curing time |
| Unlimited shelf life |
| Non-flammable |
| 99.6 percent PTFE < 0.4 percent composition |
| > 100 percent elongation |
| 15 N/sq-mm tensile strength |
| Pressure rating: Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000kPa |
| Temperature range: -450 to 500 deg F PTFE is completely stable up to 500 deg F |
| Decomposition is slow up to 750 deg F |
| Although decomposition will occur on contact with naked flames |
| Note: pressure ratings are relative to the quality and torque of the fittings and the amount of tape used |
| UL Listed |
| For Concentrated and Dilute Acids, Alcohols, Gasohol, Aliphatic Solvents, Aromatic Solvents, Chlorinated Solvents, Liquid Ammonia, Concentrated Caustics, Compressed Air, Steam, Water, Cutting Oils, Diesel Fuel Oil, Ethylene Glycol, Glycerine, Fatty Acids, Heating Oils, Kerosene, Hydraulic Fluids, Hydraulic Oils, Gaseous and Liquid Hydrogen, Gaseous and Liquid Inert Gases, Jet Fuel, Ketones, Petroleum Solvents, Liquid Petroleum Gas, Natural Gas, Mineral Oils, Vegetable Oils, Gaseous and Liquid Nitrogen and Liquid Soap |