if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Automatic Trap Prime Valve
SIOUX 695-01 VALVE TRAP PRIMER BRASS PLATED
Miscellaneous Specialty Valves
}
Automatic Trap Prime Valve
950999
MFG #: 695-01
Product ID:950999
Famous Supply
- Finish: Brass Plated
- Series: 695
- Type: Automatic
- Domestic/Import: Domestic
Where replenishment of water in floor drain traps is required; trap primer valves shall be 1/2 in FIP inlet x 1/2 in MIP outlet, automatic trap primer valves which activate with a 10 PSIG pressure drop between 30-150 PSIG. Water release shall be factory set. Trap primer valve shall have large port openings and a noncorrosive brass finish. Must be UPC/IAPMO listed, and ASSE certified to the ASSE 1018 standard.
- Features
- Standards & Approvals
| Automatically activates to replenish evaporated water in floor drain traps to prevent the escape of sewer gases |
| Large port openings in debris screen prevent clogging from sediment and debris |
| Activates with a 10 psi pressure drop at operating pressure of 30 to 150 psi |
| Water release is factory set 0.25 oz per activation, so no field adjustment is necessary |
| Single trap primer can service up to eight traps using splitter and distributors |
| Accepted by the Oregon state board of health, the Army Corps of engineers, the City of Los Angeles and engineers all over the U.S |
| DO NOT use thread sealant compound |
| ASSE 1018 |
| UPC/IAPMO |