if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
NIBCO NLH090H WD-2000 Wafer Style Butterfly Valve, 4 in Nominal, 125/150 lb, Ductile Iron Body, EPDM Softgoods, Domestic
NIBCO WD-2000-0 4" WAFER STYLE BUTTERFLY VALVE, D.I. BODY, EPDM SEALS, ALUM/BRASS DISC, 200 PSI, BARE STEM
Butterfly Valves
}
NIBCO NLH090H WD-2000 Wafer Style Butterfly Valve, 4 in Nominal, 125/150 lb, Ductile Iron Body, EPDM Softgoods, Domestic
2571819
MFG #: WD-2000-0
Product ID:2571819
Famous Supply
- Actuator Type: Bare Stem
- Disc Material: Aluminum Bronze
- Media: Water
- Series: WD-2000
- Stem & Pin Material: 416 Stainless Steel (Stem)
- Temperature Rating: 225 deg f
- Nominal Size: 4 in
- Pressure Class: 125/150 lb
- Body Material: Ductile Iron
- Type: Wafer Style
- Softgoods Material: EPDM
- Domestic/Import: Domestic
The NIBCO® wafer type butterfly valve provides Bubble tight shut-off at 200 psi. The wafer valve is ideal for commercial and some light industrial process applications including HVAC and vacuum services, in addition to hot and cold potable water. The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 deg) open to close. The valve's unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 in. Please refer to NIBCO® technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO® 5-year 125% limited warranty.
- Features
- Warranty
- Standards & Approvals
- Application
| 225 deg F continuous and 250 deg F intermittent service |
| Stainless steel stem with copper bushings |
| Operating mechanism - Bare stem, infinite position plated and lock, lever lock, manual gear operator and pneumatic/electric automation |
| California health and safety code section 116875 |
| Not recommended for steam service |
| EPDM seat liner/seal |
| 5 Years Limited |
| MSS SP-67 |
| MSS SP-25 |
| US Coast Guard Category A |
| Vermont Act 193 |
| PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| For commercial and some light industrial process applications including HVAC and vacuum services, in addition to hot and cold potable water |