if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
NIBCO NJ83008 S-585-70 2-Piece Ball Valve With Ports, 3/4 in Nominal, CXC Solder End Style, Bronze Body, Full Port, PTFE Softgoods, Domestic
NIBCO S-585-70-3/4" 3/4" C X C FULL PORT BALL VALVE 600# WOG / BLOWOUT PROOF STEM 2 PIECE CAST BRONZE BODY
Ball Valves
}
NIBCO NJ83008 S-585-70 2-Piece Ball Valve With Ports, 3/4 in Nominal, CXC Solder End Style, Bronze Body, Full Port, PTFE Softgoods, Domestic
561893
MFG #: S-585-70-3/4"
Product ID:561893
Famous Supply
- Actuator Type: Standard Lever
- Ball Material: Chrome Plated Brass
- Inlet to Outlet Length: 3-1/4 in
- Media: Air/Gas/Water
- Orifice Size: 3/4 in
- Pressure Rating: 600 psi
- Series: S-585-70
- Temperature Rating: 400 deg f
- Top to Inlet Center: 2-1/4 in
- Trim Material: Silicon Bronze Stem
- Type: 2-Piece
- Nominal Size: 3/4 in
- End Style: Sweat x Sweat
- Body Material: Bronze
- Port Type: Full
- Softgoods Material: PTFE
- Domestic/Import: Domestic
The NIBCO® 2-Piece ball valve features solder ends for quick and efficient installation. The full port bronze ball valve provides bubble-tight shut-off at 600 psi. The valve's reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 deg) open to close. The 2-Piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. Please refer to NIBCO® technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO® INC. 5-year 125% limited warranty.
- Features
- Warranty
- Standards & Approvals
- Application
| Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure |
| Blowout-proof stem |
| Dezincification resistant |
| PTFE seat ring/packing |
| Use in U.S. drinking water applications is prohibited after January 3, 2014 |
| 5 Years Limited |
| MSS SP-110 |
| California Provision: WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm |
| Commercial and Light Industrial Process Applications that may Include HVAC, Hot and Cold Domestic Water, Low Pressure Steam, Compressed Air, LP Gas and Natural Gas |