if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
NIBCO NL95008 T-585-70 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Cast Red Bronze Body, Full Port, PTFE Softgoods, Domestic
NIBCO T-585-70-3/4" LEADED 3/4" IPS FULL PORT BALL VALVE 600# WOG /BLOWOUT PROOF STEM 2 PIECE CAST BRONZE BODY
Ball Valves
}
NIBCO NL95008 T-585-70 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Cast Red Bronze Body, Full Port, PTFE Softgoods, Domestic
557705
MFG #: T-585-70-3/4"
Product ID:557705
Famous Supply
- Actuator Type: Standard Lever
- Ball Material: Chrome Plated Brass
- Inlet to Outlet Length: 2.94 in
- Media: Air/Gas/Water
- Orifice Size: 3/4 in
- Pressure Rating: 600 psi
- Series: T-585-70
- Temperature Rating: 400 deg f
- Top to Inlet Center: 2-1/4 in
- Trim Material: Silicon Bronze Stem
- Type: 2-Piece
- Nominal Size: 3/4 in
- End Style: FNPT
- Body Material: Cast Red Bronze
- Port Type: Full
- Softgoods Material: PTFE
- Domestic/Import: Domestic
The NIBCO® bronze ball valve provides bubble-tight shut-off at 600 psi. With the reinforced PTFE seat ring and brass hard chrome plated ball, the valve exhibits high chemical resistance properties. The 2-Piece valve is recommended for many high pressure applications, HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 deg) open to close. The 2-Piece valve features thread ends for easy installation. Please refer to NIBCO® technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO® INC. 5-year 125% limited warranty.
- Features
- Warranty
- Standards & Approvals
- Application
| Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure |
| Blowout-proof stem |
| Dezincification resistant |
| PTFE seat ring/packing |
| Use in U.S. drinking water applications is prohibited after January 3, 2014 |
| Standard lever handle, optional NIB-SEAL® |
| 5 Years Limited |
| ASTM B371 Alloy C69430 Stem |
| ASTM B584 Alloy C84400 Body |
| ASTM B124 Alloy C37700 or ASTM B16 Alloy C36000 Ball |
| MSS SP-110 |
| California Provision: WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm |
| For Many High Pressure Applications, HVAC, Hot and Cold Domestic Water, Low Pressure Steam, Compressed Air, LP Gas and Natural Gas |