if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
A.Y. McDonald 5133-154 Ball Curb Stop, 3/4 in, -22 CTS Compression, Brass Body, EPDM Softgoods
AY-MCDONALD 5133-154 76100-22 LEAD FREE BALL CURB CTS X CTS MAC-PAK
Ball Valves
}
A.Y. McDonald 5133-154 Ball Curb Stop, 3/4 in, -22 CTS Compression, Brass Body, EPDM Softgoods
3463375
MFG #: 5133-154
Product ID:3463375
Famous Supply
- Ball Material: Brass
- Media: Water
- Pressure Rating: 300 psi
- Top to Inlet Center: 2.42 in
- Nominal Size: 3/4 in
- End Style: -22 CTS Compression
- Body Material: Brass
- Softgoods Material: EPDM
A.Y. McDonald® ball valve curb stops maintain their low turning torques and bubble-tight 300 psig water pressure rating due to the PTFE coated brass ball that is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. McDonald® ball curb stops offer positive shut-off from either direction and are available with a wide variety of end connections or Minneapolis curb box threads. A brass 2 in square operating head that is easily pinned to existing curb stops is available separately.
- Features
- Warranty
- Standards & Approvals
| PTFE coated brass ball rotates 360 deg |
| Blow-out proof EPDM port seals |
| End piece joint sealed with an EPDM O-Ring and thread locker |
| Insert stiffeners are required on all flexible plastic connections |
| Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest revision) and identified with NL |
| Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNS C83600 -85-5-5-5 (latest revision) |
| EPDM seal |
| Limited |
| ANSI/AWWA C800 |
| ASTM B584 |
| NSF/ANSI 61/372 |
| UNS C89833 |