if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Mission 1903111 Heavy Duty Heavy Weight No-Hub Coupling, 3 in Nominal, Cast Iron End Style, Stainless Steel, Domestic
MISSION C300HW 3" HEAVY DUTY NO-HUB COUPLING 1903111
Flexible Transition Pipe Fittings
}
Mission 1903111 Heavy Duty Heavy Weight No-Hub Coupling, 3 in Nominal, Cast Iron End Style, Stainless Steel, Domestic
3322316
Product ID:3322316
Famous Supply
- Type: Heavy Duty
- Fitting/Connector Type: Coupling
- Nominal Size: 3 in
- End Style: Cast Iron
- Material: Stainless Steel
- Domestic/Import: Domestic
Mission Heavy Weight No-Hub Coupling, Heavy Duty, Fitting/Connector Type: Coupling, 3 in Nominal, Cast Iron, Stainless Steel, Domestic/Import: Domestic
- Features
- Standards & Approvals
| More effective joint movement restraint: stainless steel strap bands are 12.5% thicker than on traditional no hub couplings providing a positive seal when properly torqued to 80 in/lb |
| Stronger, more uniform scaling capacity: axially slotted clamp bands tighten independently to accommodate most any variances in outside diameters of cast iron pipe and fittings being joined |
| Greater surface load bearing: wider 304 Series stainless steel shield accommodates additional sealing clamps to provide for greater load bearing contact 1-1/2 to 4 in sizes for four stainless steel bands and 5 to 15 in sizes for six stainless steel bands |
| Higher resistance to shear forces: rugged construction, excellent sealing properties and the arrangement of intermittent corrugations in the outer stainless steel band provide resistance to shear forces and help alignment while maintaining flexibility |
| Corrosion resistant: 304 Series stainless steel combined with significant deflection factor makes this coupling highly dependable above and below ground |
| Safe and easy to install: flanged gasket helps maintain alignment during installation and tapered ends on shield reduce friction and prevent injury from sharp edges |
| Versatile - Internal profile of elastomeric sleeve against intermittent corrugation suits specific performance application of non-potable waste systems |
| Multiple bands attached to heavy duty, corrugated 304 series stainless steel shield over a molded one-piece elastomer sealing sleeve |
| Sealing rings on flanged neoprene rubber gasket meet or exceed the requirements of ASTM C 564 |
| Axially slotted heavy duty worm drive clamps tightened to 80 in/lbs of torque |
| 3 in W |
| For heavy-duty installations requiring more than a standard No Hub coupling |
| ASTM A240/A240M-06 |
| ASTM C1540-11/C564-11 |
| FM 1680 Compliant |
| UPC 7816 |