if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
100-AB 3-Piece Booster Pump
B&G 106192LF 100-AB 1/12-HP BRONZE CIRCULATOR L/FLANGES
Hydronic Circulating Pumps
}
100-AB 3-Piece Booster Pump
536086
MFG #: 106192
Product ID:536086
Famous Supply
- Amperage Rating: 1.75
- Dimensions: 14-7/8 L x 6-3/8 H in
- Frequency Rating: 60
- Impeller Type: Polypropylene
- Maximum Head: 8 ft
- Maximum Pressure: 125 psi
- Motor Speed: 1725 rpm
- Mounting Type: Flange
- Power Rating: 1/12 hp
- Series: 100
- Temperature Rating: 225 deg f
- Type: Single Speed, Bronze, 3-Piece
- Flow Rate: 33 gpm
- Voltage Rating: 115
- Phase: 1
For applications requiring higher flow and head pressures, Bell & Gossett provides an entire range of booster pumps. The designs of these pumps are based on 3-part configuration which offers complete field repairability and compact construction. All Bell & Gossett boosters are equipped with the incomparable Bell & Gossett manufactured motor for quiet and efficient operation.
- Features
- Standards & Approvals
- Application
| Oil lubricated circulator |
| Bronze body |
| 115V With built-in overload protection |
| Sleeve bearing, oil lubricated with replaceable resilient motor mounts |
| Noise dampening coupler |
| Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute |
| Long bronze sleeve bearings maintain exact shaft alignment |
| Provides for constant circulation of oil over bearing surfaces |
| Precision ground pump shaft is oversized to provide large bearing surfaces |
| Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life |
| The Bell & Gossett mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems |
| Centrifugal impeller prevents accumulation of air at seal faces to assure long life |
| Close impeller/body tolerances minimize water slippage and maximize efficiency |
| Potable water is supplied |
| 3/4, 1, 1-1/4 and 1-1/2 in NPT flange |
| Model 100 AB |
| CSA Certified |
| cUL/UL Listed |
| SA Registered |
| For hydronic heating and cooling systems, domestic water and industrial applications |