if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Bell & Gossett PL-50B 1BL017LF PL Series Maintenance-Free Booster Pump, 115 VAC, 1 ph
B&G 1BL017LF PL-50B BRONZE CIRCULATOR 1/6-HP L/FLANGES
Hydronic Circulating Pumps
}
Bell & Gossett PL-50B 1BL017LF PL Series Maintenance-Free Booster Pump, 115 VAC, 1 ph
1489826
MFG #: PL-50B
Product ID:1489826
Famous Supply
- Amperage Rating: 1.8
- Bearing Type: Sealed Precision Steel Ball Bearing Permanently Lubricated
- Dimensions: 9-1/8 in L x 4-1/2 in W x 8-1/2 H in
- Frequency Rating: 60
- Impeller Type: 30% Glass Filled Noryl®
- Maximum Head: 17 ft
- Maximum Pressure: 150 psi
- Motor Speed: 3300 rpm
- Mounting Type: In-Line Flange
- Power Rating: 1/6 hp
- Series: PL
- Temperature Rating: 225 deg f
- Type: Single Speed , Bronze
- Flow Rate: 57 gpm
- Voltage Rating: 115
- Phase: 1
The series PL™ close coupled booster pumps are specifically designed for quiet operation in hydronic, radiant and geothermal heating and cooling systems. These in-line permanently lubricated pumps are available in cast iron or lead-free bronze body construction.
- Features
- Standards & Approvals
- Application
| Permanently lubricated |
| Bronze body |
| PL boosters equipped with a drip-proof motor are recommended for indoor use only |
| Bell & Gossett powerful, dry-motor design delivers exceptional performance |
| 25 percent more efficient than competition |
| Precision-machined and balanced alloy steel rotor for superior performance |
| Solid stiff-shaft design is constructed of high-strength alloy steel impervious to cracking caused by thermal stresses |
| XL-11™ Precision-crafted bearing system |
| Advanced close-coupled design increases pump life and efficiency, assures dependable seasonal start-ups and can easily handle difficult water conditions |
| Tough, durable seal system features a carbon/silicon carbide seal on a stainless steel shaft sleeve for long life and rugged operation |
| Double sided stainless steel neck ring for optimum efficiency |
| Contains less than 0.25 percent lead content by weight on wetted surfaces |
| 1, 1-1/4 and 1-1/2 in NPT flange |
| Model PL-50B |
| cUL/UL Listed |
| SA Registered |
| For hydronic, radiant and geothermal heating and cooling systems |