if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Zoned Comfort Control Zone Control Panel, Gray
APRILAIRE 6202 PERFECT-TEMP - CONTROL PANEL - SINGLE STAGE (2 ZONE)
Zoning Control Panels
}
Zoned Comfort Control Zone Control Panel, Gray
628143
MFG #: 6202
Product ID:628143
Famous Supply
-
Depth:
1.86 in
-
Display Type:
LED
-
Number of Zones:
2
-
Series:
6200
-
Stages:
1
-
Type:
New Design
-
Width:
8.63 in
-
Voltage Rating:
20 to 30
-
Amperage Rating:
3
-
Height:
9.66 in
-
Color:
Gray
Aprilaire offers flexibility for all your zone control applications by providing you with all the features you demand. Accounting for excess system pressure is a requirement of any zone control system and we know there are many options for pressure relief. That is why Aprilaire supports all the popular options. You can choose from Aprilaire's exclusive 'Controlled Pressure Relief' method (which requires no bypass damper), using a bypass damper along with plenum temperature control or choosing to bypass to a dump zone.
-
Features
-
Warranty
-
Application
Any zone sets modes provides true independent control for each zone |
Continuous fan be zone individual zone thermostats can call for fan operation independently for ventilation |
Zone changeover based on time, if call for opposite modes exist, the control panel will alternate to satisfy each call |
Fan purce: assures air is directed to lasts zone(s) calling |
Short cycle protection, protects the HVAC equipment from too frequent cycles |
Maintenance free, no maintenance or adjustment needed after installation |
Plenum temperature control (adjustable), protects equipment from excessive high and low temperatures caused be reduced airflow when small zone are calling |
LED status indicators(visible through cover), simplifies start up and troubleshooting |
Time delay override speed checkout for the installed |
Work with 2 or 3 wires dampers, compatibility if you are changing our an old panel with 3 wires damper |
Fuse protection protects the control panel against miss wiring |
Extra fuse on board: convenience if fuse blows |
Adjustable purge timing: compatibility with all brand of equipment |
Elec/non-elec switch proper control of the fan (G-terminal) for either electric or fossil fuel furnaces |
140 deg F temperature |
50 or 60 Hz frequency |
Can use 18 or 20 AWG solid (non-stranded) wires |
For single stage heat/cool equipment |