if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Guardian RGF29060BE12MP11 2-Stage Gas Furnace, Natural Gas, 60000 Btu/hr Input, 58000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1200 cfm, High-Efficiency ECM Blower Motor
GUARDIAN RGF29060BE12MP11 ## 95+% AFUE TWO STAGE STD. ECM 060BTU 12CFM ##While Supplies Last##
Gas Furnaces
Brand:
}
Guardian RGF29060BE12MP11 2-Stage Gas Furnace, Natural Gas, 60000 Btu/hr Input, 58000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1200 cfm, High-Efficiency ECM Blower Motor
3362424
MFG #: RGF29060BE12MP11
Product ID:3362424
Famous Supply
-
Connection Size:
1/2 in
-
Dimensions:
17-1/2 in L x 29-1/2 in W x 33 in H
-
Fuse Size:
15 a
-
Ignition Type:
Direct
-
Motor HP:
1/2
-
Series:
Guardian
-
Type:
2-Stage
-
Furnace Position:
Multi-Position
-
Low NOX:
No
-
Gas Type:
Natural Gas
-
Input Capacity:
60000 btu/hr
-
Output Capacity:
58000 btu/hr
-
Voltage Rating:
115
-
AFUE Rating:
95.5
-
Flow Rate:
1200 cfm
-
Motor Type:
Multi-Speed ECM Blower
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications. These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation. These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.
-
Features
-
Warranty
-
Standards & Approvals
-
Application
35 to 65 deg F high and low fire air temperature rise |
190 deg F maximum outlet temperature |
Compact, easy to install, ideal 33 in H tall cabinet |
Blower-off delay for cooling SEER improvement |
Easy access to controls to connect power/control wiring |
Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation |
Low unit amp requirement for easy replacement application |
Electronic hot surface ignition saves fuel cost with increased dependability and reliability |
20 Years Limited on Heat Exchangers, 10 Years Limited on Heat Exchangers in Commercial Applications, Standard 5 Years Limited Parts |
AHRI Certified |
CSA Certified |
Design Certified |