if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Luxaire TM9E080B12MP11 LX Series 1-Stage Gas Furnace, Multi-Position Furnace, Natural Gas, 80000 Btu/hr Input, 76000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1200 cfm, High-Efficiency ECM Blower Motor
LUXAIRE TM9E080B12MP1# ## GAS FURNACE 95% SINGLE STAGE STD ECM MOTOR MULTI-POSITION 33" TALL 80,000 BTU 1200 CFM
Gas Furnaces
}
Luxaire TM9E080B12MP11 LX Series 1-Stage Gas Furnace, Multi-Position Furnace, Natural Gas, 80000 Btu/hr Input, 76000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1200 cfm, High-Efficiency ECM Blower Motor
3321210
MFG #: TM9E080B12MP1#
Product ID:3321210
Famous Supply
- Connection Size: 1/2 in
- Dimensions: 17-1/2 in L x 29-1/2 in W x 33 in H
- Fuse Size: 15 a
- Ignition Type: Direct
- Motor HP: 1/2
- Series: LX Series
- Type: 1-Stage
- Furnace Position: Multi-Position
- Low NOX: Yes
- Gas Type: Natural Gas
- Input Capacity: 80000 btu/hr
- Output Capacity: 76000 btu/hr
- Voltage Rating: 115
- AFUE Rating: 95.5
- Flow Rate: 1200 cfm
- Motor Type: Multi-Speed ECM Blower
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications. These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation. These units are Category IV, National Fuel Gas Code and may be vented either through side wall or roof applications using approved plastic combustion air and vent piping. Approved plastic combustion air and vent piping include Selkirk Polyflue, DuraVent Polypro, & Centrotherm Innoflue polypropylene venting systems.
- Features
- Warranty
- Standards & Approvals
- Application
| 40 to 70 deg F rise air temperature |
| 190 deg F maximum outlet temperature |
| Proven 1-stage burner |
| Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary |
| Compact, easy to install, ideal 33 in H tall cabinet |
| Blower-off delay for cooling SEER improvement |
| Easy access to controls to connect power/control wiring |
| Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation |
| 20 Years Limited on Heat Exchangers in Residential Applications, 10 Years Limited on Heat Exchangers in Commercial Applications, Standard 5 Years Limited Parts |
| AHRI Certified |
| CSA Certified |
| Design Certified |
| Residential Application |