if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Luxaire TG9S100C16MP11 1-Stage Gas Furnace, Natural Gas, 100000 Btu/hr Input, 95000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1600 cfm, PSC Blower Motor
LUXAIRE TG9S100C16MP11 ## GAS FURNACE 95% SINGLE STAGE PSC MOTOR MULTI-POSITION 33" TALL 100,000 BTU 1600 CFM ##While Supplies Last##
Gas Furnaces
}
Luxaire TG9S100C16MP11 1-Stage Gas Furnace, Natural Gas, 100000 Btu/hr Input, 95000 Btu/hr Output, 115 VAC, 95.5 % AFUE, 1600 cfm, PSC Blower Motor
3093626
MFG #: TG9S100C16MP11
Product ID:3093626
Famous Supply
- Connection Size: 1/2 in
- Dimensions: 21 in L x 29-1/2 in W x 33 in H
- Fuse Size: 15 a
- Ignition Type: Direct
- Motor HP: 3/4
- Series: Climasure
- Type: 1-Stage
- Furnace Position: Multi-Position
- Low NOX: Yes
- Gas Type: Natural Gas
- Input Capacity: 100000 btu/hr
- Output Capacity: 95000 btu/hr
- Voltage Rating: 115
- AFUE Rating: 95.5
- Flow Rate: 1600 cfm
- Motor Type: Multi-Speed PSC Blower
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.
- Features
- Warranty
- Standards & Approvals
- Application
| 35 to 65 deg F rise air temperature |
| 190 deg F maximum outlet temperature |
| Compact, easy to install, ideal 33 in H tall cabinet |
| Blower-off delay for cooling SEER improvement |
| Easy access to controls to connect power/control wiring |
| Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation |
| Low unit amp requirement for easy replacement application |
| Electronic hot surface ignition saves fuel cost with increased dependability and reliability |
| 100% shut off main gas valve for extra safety |
| 4 speed, direct drive PSC motor |
| 24 V, 40 VA control transformer and blower relay supplied for add-on cooling |
| Hi-tech tubular aluminized steel primary heat exchanger |
| Timed on, adjustable off blower capability for maximum comfort |
| Blower door safety switch |
| Have been designed to meet specific code requirements |
| Airflow leakage less than 1% of total airflow at duct performance testing conditions |
| Movable duct connector flanges for application flexibility |
| Quiet inducer operation |
| Inducer rotates for easy conversion of venting options |
| Fully supported blower assembly for easy access and removal of blower |
| 20 Years Limited on Heat Exchangers in Residential Applications, 10 Years Limited on Heat Exchangers in Commercial Applications, Standard 5 Years Limited Parts |
| AHRI Certified |
| CSA Certified |
| Design Certified |
| Residential Application |