if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Luxaire TG8S120C16MP11 1-Stage Gas Furnace, Natural Gas, 120000 Btu/hr Input, 96000 Btu/hr Output, 115 VAC, 80 % AFUE, 1600 cfm, PSC Blower Motor
LUXAIRE TG8S120C16MP11 GAS FURNACE 80% SINGLE STAGE PSC MOTOR MULTI-POSITION 33" TALL 120,000 BTU 1600 CFM ##While Supplies Last##
Gas Furnaces
}
Brand: 
Luxaire TG8S120C16MP11 1-Stage Gas Furnace, Natural Gas, 120000 Btu/hr Input, 96000 Btu/hr Output, 115 VAC, 80 % AFUE, 1600 cfm, PSC Blower Motor
3093542
MFG #: TG8S120C16MP11
Product ID:3093542
Famous Supply
- Connection Size: 1/2 in
- Dimensions: 21 in L x 29-1/2 in W x 33 in H
- Fuse Size: 15 a
- Ignition Type: Direct
- Motor HP: 1/2
- Series: Climasure
- Type: 1-Stage
- Furnace Position: Multi-Position
- Low NOX: No
- Gas Type: Natural Gas
- Input Capacity: 120000 btu/hr
- Output Capacity: 96000 btu/hr
- Voltage Rating: 115
- AFUE Rating: 80
- Flow Rate: 1600 cfm
- Motor Type: Multi-Speed PSC Blower
These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications. These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation. These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.
- Features
- Warranty
- Standards & Approvals
- Application
| 40 to 70 deg F rise air temperature |
| 190 deg F maximum outlet temperature |
| Compact, easy to install, ideal 33 in H tall cabinet |
| Blower-off delay for cooling SEER improvement |
| Easy access to controls to connect power/control wiring |
| Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation |
| Low unit amp requirement for easy replacement application |
| Electronic hot surface ignition saves fuel cost with increased dependability and reliability |
| 20 Years Limited on Heat Exchangers, 10 Years Limited on Heat Exchangers in Commercial Applications, Standard 5 Years Limited Parts |
| AHRI Certified |
| CSA Certified |
| Design Certified |
| Residential Application |