if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
The Unico System M2430CL1-H M Series Hydronic Heating Module, 24000 to 30000 Btu/hr Nominal Capacity
UNICO M2430CL1-H MODULE, HOT WATER COIL 2-2.5
Residential Small Duct High Velocity Air Handlers
}
The Unico System M2430CL1-H M Series Hydronic Heating Module, 24000 to 30000 Btu/hr Nominal Capacity
3450888
MFG #: M2430CL1-H
Product ID:3450888
Famous Supply
-
Dimensions:
25 in L x 12 in W x 17-1/2 in H
-
Liquid Line Size:
7/8 in
-
Series:
M
-
Temperature Rating:
160 degrees f
-
Type:
Hydronic
-
Nominal Capacity:
24000 to 30000 btu/hr
-
Flow Rate:
8 gpm
Unico System designed and built hydronic heating units can be easily installed with the matching blower and cooling modules.
-
Features
-
Warranty
-
Application
The heating module can be matched to a blower module for a heating only system or it can be matched with both a blower and a cooling module for a system that heats and cools. |
The cabinet is constructed of 22 gauge (0.030 in, 0.76 mm) galvanized steel with removable access panels on both sides for ease of service. |
All access panels are secured with slotted hex head washer screws and hardened steel U-clip nuts to prevent stripping. |
The cabinet is fully lined with closed cell insulation. |
Easy snap latches are included for quick field assembly with the matching modules. |
Unico designed and fabricated hot water coils are constructed of evenly spaced corrugated aluminum fins mechanically bonded to copper tubes. |
The tubes are ½-in. diameter on staggered centers. Full-collar fins provide greater tube-fin contact for excellent heat transfer. |
Each coil is pressure tested at the factory. |
Bleed and drain valves are provided on the headers outside the cabinet. |
5 and 10 Year Extended Warranties may be available, see Bulletin 10-012.002 and 10-014-002 respectively |