if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
3/4 in Tradeline Standing Pilot Gas Valve, 34000 to 425000 Btu/hr Capacity, NG, 750 mV
HONEYWELL VS820A-1054 TRADELINE. 3/4 X 3/4, WITH SIDE OUTLETS. REG SET AT 3.5 IN WC. TWO 3/4X1/2 AND ONE 1/2X3/8 ADAPTERS. INCLUDES GAS VALVE SURCHARGE 750MV
Gas Valves
}
3/4 in Tradeline Standing Pilot Gas Valve, 34000 to 425000 Btu/hr Capacity, NG, 750 mV
691261
MFG #: VS820A-1054
Product ID:691261
Famous Supply
- Dimensions: 4-3/4 H x 4-1/16 W x 3-3/16 D in
- Electrical Connections: 1/4 in Male Quick-Connect Terminal
- Series: VS820
- Temperature Rating: 32 to 175 deg f
- Nominal Size: 3/4 in
- End Style: NPT
- Ignition Type: Standing Pilot
- Nominal Capacity: 34000 to 425000 btu/hr
- Pressure Rating: 0.5 psi
- Type: Standard Opening
- Gas Type: NG
- Coil Voltage: 750
- Domestic/Import: Import
These gas controls combine a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator and optional gas pressure regulator. They require the use of a 750 mV Powerpile generator (thermopile). The generator, heated by the pilot burner flame, provides the electrical energy to operate the combination gas control. A millivoltage thermostat with suitable accessory controls completes the automatic control system for the heating appliance.
- Features
- Standards & Approvals
- Includes
| Easy to install, adjust and service, all adjustments and connections are accessible from top of control |
| Add separate energy cutoff (ECO) where codes call for dual safety shutoff |
| Complete safety shutoff on pilot flame failure |
| Lite-Rite (Off-Pilot-On) lighting sequence |
| Body pattern - Straight-through, multi-tapped with 1/2 in right and left outlets plugged |
| 0 to 90 deg in any direction from the upright position of the gas control knob mounting |
| 3-1/2 in WC pressure regulator setting |
| For self-powered automatic control |
| CSA 112395 |
| (2) 3/4 x 1/2 in Reducer Bushing, (1) 1/2 x 3/8 in Reducer Bushing and Pilot Flow Adjustment Screw |