if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
BrassCraft ProCoat CSSC14-36 Flexible Gas Connector, 3/4 x 1/2 in, MNPT, 36 in L, Stainless Steel, Domestic
BRASSCRAFT CSSC14-36 3/4 x 1/2 MIP x MIP x 36 in CORRUGATED STAINLESS GAS CONNECTOR 1/2 in ID - 5/8 OD PROCOAT
Washer & Dryer Accessories
}
BrassCraft ProCoat CSSC14-36 Flexible Gas Connector, 3/4 x 1/2 in, MNPT, 36 in L, Stainless Steel, Domestic
3430381
MFG #: CSSC14-36
Product ID:3430381
Famous Supply
- Finish: Powder Coated
- Outside Diameter: 5/8 in
- Type: Flexible
- Nominal Size: 3/4 x 1/2 in
- End Style: MNPT
- Length: 36 in
- Material: Stainless Steel
- Domestic/Import: Domestic
BrassCrafts procoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly.
- Features
- Standards & Approvals
- Application
| Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures |
| ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt |
| Smooth, burnished connector ends seal with less torque, making installation easier |
| High tensile strength stainless steel is less susceptible to work hardening |
| Deep corrugations enhance flexibility and maneuverability of connector during installation |
| Gas connector is 100 percent leak tested |
| Ideal for large demand appliances such as 5-burner+ gas ranges, furnaces and smaller BTU residential tankless water heaters |
| 1/2 in I.D. (5/8 in O.D.) corrugated stainless steel with corrosion resistant coating |
| Steel fittings included 3/4 in MIP (tapped 1/2 in FIP) and 1/2 in MIP |
| -40 to 150 deg F temperature |
| 1/2 psi maximum pressure |
| 1/2 in FIP tap |
| PROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| For indoor and outdoor use |